Oil Pressure Sender Switch, HY, CX, R3, R4, R8, R10, R16, J5

Good quality (Lucas/Smiths) oil pressure sender unit.

• Supplied with aluminium sealing washer.
• Thread: M14 x 1.5mm pitch. (Length of thread: 11.5mm).
• Flat 6.3mm spade terminal, (so may require change of wiring connector on some vehicles).
• 21mm spanner size hexagon.
• 0.4 bar

Applications (May not be suitable for all variations, so please check thread size etc):

Citroën:

• HY (petrol engine): 03/65 onwards
• CX  most models, (excluding Athena)

Peugeot:

• J5 280L CRD93 (U25/661): 1981-1990
• J5 290L CRD93LS (U25/673): 1990-1994

Renault:

• 3/4 (603cc & 747cc & 845cc): 1961-1983
• 8/8S/8Gordini (1108cc): 1962-1972
• 10 1.1/1.3 (1108cc & 1289cc): 1966-1972
• 16 DL/GL/TL/TS (1470cc & 1565cc): 1965-1980
• 4cv / Floride S / Caravelle

Also suitable for some of the following:

• Alfa Romeo 155/164/GTV: 1992-1997
• Fiat 124/125: 1966-1973
• Fiat Panda 750/Croma 1.6: 1985-1991
• Lada 1200/1300: 1972-1979
• Lancia 2000: 1969-1974
• Opel: 1964-1970
• Peugeot J5 2.5TD: 1981-1994
• Saab 90 2.0: 1986-1987
• Seat 124/1200/1430: 1966-1979
• Seat Ritmo 1.7D: 1981-1983