Stainless arm for original Geco mirror arm on 2cv or Dyane.
The last remaining original stock from the end of production by the Geco factory. (Geco made original fitment and aftermarket mirrors for Citroen and other French car manufacturers).
Please note that on later production, although stainless steel was used instead of the chromed mild steel of the earlier production, the earlier arms were of better quality. However, also please note:…..
Important note on short arms: Unlike many of the later production 2cv short mirror arms, these have been produced with the bend in the correct place and of sufficient angle to enable full adjustment of the mirror and still give clearance for the passenger side flip-up window to be opened/closed!
Please use the drop-down menu above to select the type of mirror arm(s) that you require. “Left” or “Right” are as you sit in the car, looking forwards. (Prices reflect stock levels: We have very few 16cm arms left but plenty of 22.5cm right-hand).
Applications:
16cm arms were used on 2cvs & Dyanes cars. Whether right-hand drive or left-hand drive, this was always the length used on the driver’s side. If a mirror was fitted to the passenger side, RHD cars had a 16cm arm but LHD cars had a 22.5cm arm.
22.5cm arms were used on 2cv Vans and also on the passenger side of left-hand drive cars. (They can also be a good replacement on 2cvs/Dyanes that are used for towing a wide trailer)
26cm straight arms were used on Acadianes (and can also be a good replacement on 2cv Vans or for 2cvs/Dyanes used for towing a wide trailer). We have had 26cm arms made, using higher quality stainless steel than the originals. They are listed seperately (click here).
PLEASE NOTE: Other parts may be needed:
The fixing point at the back of the mirror head is usually corroded and seized and often breaks when attempting to undo it. (Click here for swivel parts). If you already have a MirrorCool silicone surround trim on your mirror, the glass and trim can be removed and re-fitted in order to fit a new swivel kit and arm. However, if you still have the original hard plastic surround, you will need to replace it (Click here for MirrorCool silicone trim kit).
Reviews
There are no reviews yet.