A nice simple reverse lamp unit that matches our rear fog lamp, complete with adjustable mounting bracket and fixings.
Alternatively, this unit can be flush-mounted by drilling through two pre-positioned holes and by using bolts/screws with an 8mm or 5/16 A/F hexagon head (not supplied) in the hexagon-shaped moulded sections of the plastic casing.
Requires a 382 type bulb.
Does not include wiring as connections are made directly to the bulb-holder, inside the unit. On some cars it will therefore be necessary to add short wires to extend the cars existing wiring.
A matching Rear Fog Lamp is also available, (see "Related Products", above).
Overall width: 136mm
Overall height: 75mm
Overall depth: 65mm
Flat area at rear of lamp: 107mm x 52mm, (plus bracket mounting lug: 17mm x 10mm)