Simple copy of the type that was originally fitted to many cars when it became a legal requirement to have a rear fog light.
This unit is supplied with a mounting bracket or it can be flush-mounted by drilling through two pre-positioned holes and by using bolts/screws with an 8mm or 5/16 A/F hexagon head (not supplied) in the hexagon-shaped moulded sections of the plastic casing.
Requires a 382 type bulb, which we can also supply in 12v or 6v. (See "Related Products" above, to order).
Does not include wiring as both connections are made directly to the bulb-holder, inside the unit. On some cars it will therefore be necessary to add short wires to extend the cars existing wiring.
A matching Reverse Lamp is also available, (see "Related Products", above).
Overall width: 136mm
Overall height: 75mm
Overall depth: 65mm
Flat area at rear of lamp: 107mm x 52mm, (plus bracket mounting lug: 17mm x 10mm)