Lower price option if you want a matching set of our reverse lamp and rear fog lamp units.
These units are supplied with mounting brackets or they can each be flush-mounted by drilling through two pre-positioned holes and by using bolts/screws with an 8mm or 5/16 A/F hexagon head (not supplied) in the hexagon-shaped moulded sections of the plastic casing.
Each requires a 382 type bulb, which we can also supply in 12v or 6v. (See "Related Products" above, to order).
Wiring is not included as connections are made directly to the bulb-holder, inside the unit. On some cars it will therefore be necessary to add short wires to extend the cars existing wiring.
Approximate dimensions of each unit:
Overall width: 136mm
Overall height: 75mm
Overall depth: 65mm
Flat area at rear of lamp: 107mm x 52mm, (plus bracket mounting lug: 17mm x 10mm)